Product Description

Introduction

The 3-in-1 program card is used to set the programmable items for ESCs and stabilizers and measure the voltage for Li-Po battery. Its friendly LCD interface makes the programming and measurement easy.

Features

3-in-1 Program Card:

- Connect with the ESC to set its programmable items. It is applicable for Skylord Advanced series brushless aircraft ESCs, Volcano series brushless car ESCs, etc.
- Connect with the stabilizer or sport receiver (with a built-in stabilizer) to set its programmable items. It is applicable for ISTONE-AII stabilizer, MSR66A sport receiver, etc.
- Work as a voltmeter to measure the voltage of the whole battery pack and each cell. It is suitable for 2S to 8S Li-Po battery.

Specifications

3-in-1 Program Card:

Size (L*W*H): 52.0mm*85.6mm*17.6mm
Weight: 45g
Input Voltage: 5V~12V
Interface: Micro USB, ESC interface, Li-Po battery interface

Packing List

3-in-1 Program Card ×1

Micro USB Cable ×1

Product Videos

Custom Field

Product Reviews

Write a Review

1 Review

5
Dynam 3 in 1 Programming Card

Posted by Dick Soucy on 9th Mar 2022

I have a Dynam Seawind with the stabilizer built into the receiver. I tested the gyro by moving the airplane and all three surfaces were moving in the wrong direction. I revered all three with the 3 in 1 card and they now work fine. It was easy to move through the options and make the changes.

Dynam 3 IN 1 program card for Stabalizer DTM-1002