NZD
USD
EURO
GBP
HKD
AUD
CAD
SGD
CHF
Product Description
Introduction
Dynam RC AT-6 texan is a superb scale WWII airplane. most working had finished in factory- assembly and painting. Just about everything has been done for you before you even open the box. All that’s left to do is a few hours of final assembly and radio installation. When you’re done, you’ll have a fantastic-flying scale warbird .
The Dynam rc AT-6 is made of EPO and it will brings you the most advanced electric flight experience.
The AT-6 texan comes out of the box with all kinds of details that have been finished for you, including a factory-painted , air scoops, dummy radial engine, painted fuselage, also it come with the electric retract landing gear ,let your flying more scale .the kv950 3715 dynam motor with 2200mah ,25c battery ,powerful ,let the airplane flying fast ,also can do slow flying .
The scale split flaps are operational and ready to use right out of the box. you only need use 2 servos . retracts have been specially install for the AT-6 it torque is 3.5kg.cm
Specifications
| Model No. | DY8944 |
| Model Name | AT-6 Texan |
| Material | EPO Foam |
| Wing Span | 1370mm(53.9in) |
| Flying Weight | 1250g |
| Wing Loading | 44.6g/dm² |
| Fuselage Length | 895mm(35.2in) |
| CG | 70 - 75mm from the leading edge at the wing root |
| Motor | Detrum BM3715A-KV1050 |
| ESC | TC Skylord 40A ESC |
| Propeller | 2-Blade Prop 12*6 |
| Servo | 4x 9g |
| Elevator | Yes |
| Rudder | Yes |
| Ailerons | Yes |
| Flaps | No |
| Landing Gear | E retract |
| EDF | N/A |
| Floats | N/A |
| Tx Requirement | 6-Channel or above transmitter (Not included) |
| Rx Requirement | 6-Channel receiver (Not included) |
| Li-Po Battery | 11.1v 2200mAh 20C (Not included) |
| Appr. Assembly Time | 1 hour |
| Aircraft Type | Warbird |
| Pilot Level | experienced |
| Appr. Flight Time | 8min |
Required to FLY:
1* 6 Channels or above Transmitter and receiver， (Click here for 6 Channel transmitter and receiver)
1* 3S 11.1V XT60 Plug 2200mAh 20C Lipo battery, (Click here for the battery)
1* Lipo battery charger, (Click here for the battery charger)
