Product Description
Hobbywing Flyfun 80A V5 Brushless ESC (3S-6S) 30214201
Features
- 
ESC which features a high performance 32-bit ARM M4 microprocessor (with a running frequency of up to 72MHz) is compatible with various brushless motors. 
- 
Microprocessor powered by a separate DC regulator has better anti-interference performance greatly reduces the possibility of losing control. 
- 
DEO (Driving Efficiency Optimization) Technology greatly improves throttle response & driving efficiency and reduces ESC temperature. 
- 
Built-in high-power BEC with output voltage adjustable among 5.2V, 6.0V and 7.4V. The BEC module is separate from other circuits on the ESC, so the normal BEC output can be guaranteed (when issue like burnt power board happens) to allow users to get the aircraft back before crash. (Note: the FLYFUN 80A/120A/130A/160A-HV-OPTO-V5 doesn’t have this function.) 
- 
Normal/Soft/Very Soft start-up modes are compatible with regular propeller airplanes and EDF jet airplanes (pls ensure to select the “Very Soft Start-up” mode when using EDF jet airplanes). 
- 
Separate programming cable for connecting ESC to a LED program box and allows users to program the ESC anytime, anywhere. (For detailed info, please refer to the user manual of HOBBYWING LED program box.) 
- 
Normal/proportional/reverse brake modes (esp. reverse brake mode) can effectively shorten the landing distance for the aircraft. (Note: the FLYFUN 130A/160A-HV-OPTO-V5 doesn't have this function.) 
- 
Multiple protection features like start-up, ESC thermal, capacitor thermal, over-current, over-load, abnormal input voltage and throttle signal loss effectively prolong the service 
Specifications
Product Name: FLYFUN 80A V5
Product Number: 30214201
Type
    Brushed/Brushless: BL
    High Voltage/Regular: Regular
    Cont./Peak Current: 80A/100A  
    Input: 3-6S LiPo
    BEC Output: Switch Mode: 5.2V/6V/7.4V, 8A/20A
Wires & Connectors
    Input Wires: Red-12AWG-150mm*1 / Black-12AWG-150mm*1
    Output Wires: Black-12AWG-150mm*3
    Input Connectors: No
    Output Connecotors: 4.0 Gold Connectors (Female)
ESC Programing via
    Transmitter: Supported        
    LED Program Card: Not Supported        
    LED Program Box: Supported        
    LCD Program Box: Not Supported
    WiFi Module: Not Supported
    Program Port: Separate Program Wire
Firmware Upgrade: Not Supported
Size: 69.8x34.6x19.2mm
Weight: 92g
 NZD
 NZD
             USD
 USD
             EURO
 EURO
             GBP
 GBP
             HKD
 HKD
             AUD
 AUD
             CAD
 CAD
             SGD
 SGD
             CHF
 CHF
             
 
             
             
             
         
         
         
           
           
                   
           
                   
           
                   
          