Toggle menu
86-13427472117

Rlaarlo 1/7 Scale 4WD Brushless RTR RC Crawler JK07Pro-BS

MSRP: $959.02
Was: $959.02
Now: $869.39
(You save $89.63 )
(No reviews yet) Write a Review
SKU:
JK07PRO-BS
Weight:
12.50 KGS
Shipping:
Calculated at Checkout
Adding to cart… category.add_cart_announcement

Product Description

Rlaarlo 1/7 Scale 4WD Brushless RTR RC Crawler JK07Pro-BS

  • JK07 Pro restores the appearance of the real car, equipped with a full vehicle linkage lighting system, simulation of side tents, gantries, luggage racks and other designs the ultimate simulation of details, to take you to open the adventure of truth and speed.

  • Equipped with a 4282 high-torque 2600KV magnetic encoding FOC sensored motor, featuring a high-speed digital sensor that requires no calibration, the motor is plug-and-play. The sensor supports hot-swapping with strong anti-interference and high signal quality.

  • The FOC ESC supports 2-4S batteries with a continuous current of 140A, utilizing vector control technology. Compared to square wave ESCs, it saves 5%-20% energy, providing longer run times for climbing adventures. The acceleration and deceleration performance of the FOC ESC is over twice as fast as square wave models.

  • The high-torque motor meets the needs of most large-scale crawlers on the market. Its low-speed linear torque compensation allows the vehicle to easily overcome obstacles while maintaining perfect balance. The vehicle excels not only in climbing scenarios but also in sand running and drift, offering users an ultimate control experience.

Note:

  • Battery and Charger Sold Separately

  • The battery plug of JK07Pro is XT60 connector, customers need to buy batteries by themselves

 

STUNNING SCALE DETAIL

JK07Pro 1/7 scale highly reproduces the appearance of the real car, equipped with a full-vehicle linkage lighting system, a wealth of simulation accessories, the use of 1.5mm PC material shell is not only durable, but also enhance the overall simulation.

LIFT-OFF SHELL DESIGN

JK07Pro is fixed with spring-loaded swivel clips for easy disassembly and installation, and the hidden alignment makes the appearance neater and enhances the overall simulation.
 
 

ADJUSTABLE STEERING WHEEL AND WINDSHIELD WIPERS

The steering wheel is linked with the steering and the windshield wipers support 3-speed adjustment, further enhancing the real driving experience.
 

TOUGH CHASSIS

High-strength CNC aluminum alloy beam, 8mm stainless steel tie rods, door axle design, 120mm full-metal shock absorbers, flat bellhousing and thrust rod structure, sturdy and stable, simulation and performance at the same time.
 

FORWARD LOCATED GEARBOX

Central gearbox design and location reduces the vehicle's center of gravity whilst improving climbing performance and stability by being located more towards the front. Reverse rotation design will help eliminate torque twist.
 

MULTIPLE SERVOS TO MATCH

JK07pro full servo for precise control, high performance brushless steering servo for quick response, shift, break transmission, differential lock servo to adapt to a variety of terrain, wiper and steering wheel linkage servo to enhance the sense of realism.
 

CNC 6mm Aluminum Alloy Chassis Rails 

Treated with a high-gloss coating not only enhance the ruggedness of the car but also add to the overall aesthetics of the vehicle.

3 Link Panhard Steering Link System

The steering Link System is made of thickened 8mm stainless steel with high strength and abrasion resistance, which ensures that the steering system remains stable and reliable when the vehicle is traveling in complex terrain.

Aluminum Scale Shocks

The shock absorber is 120mm long and equipped with a dust cover, which effectively prevents dust from entering and reduces snagging and oil leakage problems, ensuring that the vehicle remains smooth when driving on bumpy roads.

Molded Inner Fenders

Tough inner fenders mount directly to the frame and shock towers to provide substantial look andfeel to JK07Pro. The authentic realism adds to the funwhile also helping to keep rocks, mud, and twigs out of the chassis.

Metal Wheel Outer Ring

The outer ring of the wheel is made of metal, which is durable and impact-resistant, suitable for all kinds of complex terrain, with 6 M2.5 screws fixing design, to further enhance the simulation of the whole car.

Front and Rear Differential Design

When the terrain becomes more challenging, locking the rear differential or locking the front differential will allow the tires to obtain better power distribution and allow the vehicle clear the obstacle easier.

High-Strength Panhard Rod

The Panhard rod design effectively suppresses lateral movement between the chassis (body) and the rear axle, ensuring smoother driving on bumpy terrain and more stable straight-line performance.

Twin Friction Plate Slipper Clutch

A slipper clutch design provides additional protection for the crawler under extreme conditions. This helps prevent any possible damage to the gears and the motor.

Tri-Drive Modes

JK07Pro supports three drive modes: front-wheel drive, rear-wheel drive, and four-wheel drive, which can be freely switched according to the terrain and playing needs, and it is convenient to switch by one key through the remote control without the need of manual adjustment.

High-Low Transmission

High-speed gear provides strong power output, suitable for high-speed driving on flat road surfaces Low-speed gears increase torque output by lowering the speed of the vehicle, making it more passable when climbing rocks and crossing muddy or sandy terrain.

Large Size Steel Gears

1.0M specification is used for motor teeth and large teeth, and 0.8M specification is used for other transmission teeth, which is strong and wear-resistant to ensure efficient and reliable power transmission.

Approach and Exit Angle Of The Vehicle

The JK07Pro features a 56° out-of-the-box approach angle for climbing walls and hills. 31° rear approach angle provides extreme performance even in the deepest ruts.

Driveshafts and Suspension Links

JK07Pro portal axle design raises the driveshaft to improve axle geometry and reduce driveshaft angles.Higher driveshafts and suspension links go over obstacles, reducing wear and smoothing the ride over bumpy roads

 

High Ground Clearance

JK07Pro has a center ground clearance of up to 90mm, which brings a more realistic off-road experience without fear of any complicated environment

 

45° Steering Angle

JK07Pro has a self-adjusting steering angle of up to 45°, which makes it easy to maneuver around even the tightest corners

Front Motor Design

The motor front mount design moves the weight bias forward, allowing you to climb obstacles with better traction

Extensive Lighting Systems

JK07Pro is equipped with a full-vehicle linkage lighting system, with a total of 12 lighting modes and realistic lighting effects, restoring the real car lighting scene

Luggage Rack Platform

The roof rack platform is equipped with rail slots that allow players to add storm packs, luggage and other simulated accessories through screw fixing to expand storage space

1.5MM PC Car Shell

The car body is made of 1.5MM-thick PC material, which can withstand high-intensity shocks and vibrations in complex terrain and is not easy to break

Simulation Side Tent

Side tents with simulation design, printed with beautiful patterns, side tents can be freely opened and closed, after unfolding to create a real outdoor camping atmosphere

Simulation Breakout Board

The extrication plate is designed with simulation, with rich details of raised logos and spikes on the surface, and can be painted with your own colors to further enhance the simulation effect

Table and Chair Simulation Pieces

The table and chair simulation pieces are exquisitely shaped and detailed, and are used with simulation figures to create a realistic outdoor camping atmosphere

4282 Brushless Motor

JK07Pro brushless version is equipped with a 4282 motor with built-in magnetically encoded sensors for smooth torque output at low speeds, making it suitable for fine maneuvering and complex terrain

Note: Some parameters may differ between versions.

140A Brushless ESC

JK07Pro brushless version is equipped with 140A brushless ESC, adopting FOC vector control technology, supporting APP to adjust the parameters, players can customize the ESC settings according to their needs to enhance the control experience

Note: Some parameters may differ between versions.

45KG Brushless Steering Servo

JK07Pro brushless version is equipped with 45kg brushless servo, which provides precise steering and quick response to enhance the handling experience

Note: Some parameters may differ between versions.

Independent Control of the Wiper

Supporting 3-speed adjustment, players can freely adjust the wiper speed according to the weather or scene needs.

 

Steering Wheel Synchronized With Steering

The steering wheel uses 8 grams of small servos, synchronized with the wheel steering, restoring the real car driving experience, allowing players to control more immersive

 

10-Channel Radio System

rlaarlo 10-channel remote control, integrated lights, wipers and other functions, control is simple and intuitive, switching through the remote control with one button, no need to manually adjust

 

 
 
 
 
 
 

Product Videos

Videos Hide Videos Show Videos

Custom Field

Product Reviews

Write a Review