Sorry but this item is currently unavailable.
Please check back at a later stage.
Support GOPRO Hero3 video auxiliary output.
Support the supply voltage polarity protection and voltage compensation.
Support the motor drive end short-circuit protection.
Support for custom initial pitch angle.
Support sensitivity parameter adjustment and software 3D pose show.
The support rocker rate mode and position mode.
Support receiver: conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver.
Support for remote devices: PPM/PCM/2.4G.
The working voltage: DC 7.4V~14.8V (Recommended 12V, three lithium battery).
Working current: 200mA-500mA (power supply voltage and the motor related).
The working environment temperature: -15 ~65 degrees Celsius.
The processor: Dual 32-bit high-speed ARM core processor.
The sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three.
The maximum angular rate: 2000°/ sec.
The maximum acceleration: 16g.
The control frequency: 2000Hz.
The motor drive frequency: 20KHz (no noise smoothing driven).
The control accuracy: 0.1°.
The control angle range: -45°~ 45°(roll), -135 °~ 90°(tilt).
Pose solver algorithms: PTZ dedicated brushless motor decoupled EKF algorithm.
For shooting equipment: GOPRO Hero.
Head hanging hook TL68A01
GOPRO camera fasteners TL68A02
GOPRO brushless PTZ camera frame assembly TL68A03
GOPRO head roll arm TL68A04
GOPRO PTZ stand arm motor base TL68A05
GOPRO brushless motor TL68A06 PTZ
GOPRO two axes PTZ shock group TL68A07
GOPRO brushless pan rack assembly TL68A08
GOPRO head roll axis brushless motor TL68A09
GOPRO AV video output cable TL68A10
GOPRO PTZ suspension ball TL68A11
GOPRO two-axis gyroscope ZYX22 PTZ
Package size: 12 * 9 * 7.2cm / 4.7 * 3.5 * 2.8in
Package weight: 276g / 9.7oz
1 * Tarot TL68A00 Brushless Gimbal
(GoPro camera is not included)