This is the outboard system only. Picture 4 shows this system installed in a TFL Warrior P1 Superstock hull. Picture 5 Shows diagram and parts list.
Comes with SSS 3660 2075Kv
Drive Specs for SSS Motor Version:
TFL SSS 3660 with 4mm male connectors.
Motor diameter: 36mm
Motor length: 60mm
2075Kv with 5mm Shaft
Installed metal water jacket.
185mm from bottom of skeg to top of outboard cover.
Cover is 55mm wide
550 Grams(approx) with brushless motor.
280 Grams(approx) without brushless motor.
Drive: 4mm Propeller shaft, requires drive dog style propellers.
Fits upto 48mm Prop
Everything besides the outboard unit.
Suggest esc size, 90amp or 150amp.
2s or 3s maximum, 40c 4000 to 5000mah lipo pack.
Propeller for 4mm prop shaft, which diameter prop will depend on the application.
4mm Female Bullet Connectors
-Recommended for 30"(750mm) to 40" (1000mm) boat in the 4 Pounds Range.
-We recommend no larger than a 36mm diameter x 60mm long motor and a total rpm of 25k or Less. Any larger could damage the gear system or other parts.
-These are gear driven and can be used with left or right rotation propellers.
-Standoff bracket tfl-B54210-14 may be required, depending on the application.
Choose a currency below to display product prices in the selected currency.